*"Excuse the fact that I'm WAY too into Miner's Haven"*

## Contents

- Route One. "The Spray and Pray method"
- Route Two "The Up the Tree method"
- Route Three "The Direct Method"
- 1e+12

## Overview Edit

Ok, first off there is a page called the Miner's Haven Calculator, where you can download something onto your computer and it will do all this stuff for you.

But knowing me, i hate downloading stuff onto my computer gradually making it slower. So, I'm here to show you exactly how to calculate the minimal conveyor time you can get while maximizing your ore value, all on any calculator.

Now sometines you get Varing Ore Values. Suxch as Atomium, things like $3.5B-25B. In that case, use the ** Lowest possible ore value **If you do the average, or the highest, then any ore value below what you chose won't be upgraded to the max.

Sometimes, with super powerful upgraders, they only upgrade to a $ ammount, or things like Big Berthat, are most convienient first. Make sure you put that in your calcuations. (For instance, with Big Bertha, multiply you initial ore value by 12, assuming you using it first.)

## Route One. "*The Spray and Pray method"* Edit

Ok. first you will need to know what value your ore starts at. You can either put it over a Basic Furnace, or looking it up on this wiki.

Then, in the calculator, put whatever number that is. Let's say 600 for a giant iron mine.

Now, what % does your upgrader upgrade by? Let's go with 35% for an upgrader that doesn't upgrade ore past 3,000,000 (3M).

With those numbers, you are going to put it in the calculator like so.

600(The value of your ore) * (times) 1.35 (The % upgraded, add a 1 if it has less than 3 digits.) ^ (Raise it to a power) 10 (Make a guess on how many you think it will upgrade by.)

Now i got 12K. But wait, THAT'S NOT 3M!?!

If it isn't past the cap, go back to where you started with 600 * 1.35 ^ __ then add a higher number (15)

I got 54K. Obviously we need to get a bigger jump in powers.

600 * 1.35 ^ 35 = 21M

WHOOPS! too high. Now you'd slowly decrease your power (**^ 35**) until you reach JUST BELOW 3M, then you add 1 and that's how many upgraders, exactly, you need.

## Route Two *"The Up the Tree method"* Edit

Ok, back with our $600 ore. Now, again we need to do 35% to 3M. In this way, you set it up in the calculator like so.

600 (Ore value) * (Times) 1.35 (The percent of upgrade, plus one if it has 2 or 1 digit) And no power.

That gets me $810.

Now, i will plug in the new ore value into the same thing, like so.

810 (New ore value from previous upgrade) * 1.35

And get my new value.

I will continuously do this until my value goes from under 3M to over 3M, then I count the number of times I multiplied by 1.35.

## Route Three *"The Direct Method"* Edit

Once again, let's go back to our $600 ore and the 3M limit. Divide the 3M limit by the value of the ore, $600. Divide the logarithm of the quotient by the logarithm of the multiplier and round the number up if it is a decimal. That's it. You now have the minimum number of upgraders you need to use to reach the limit. This is what it looks like on a calculator:

log(3,000,000 / 600) / log(1.35) = 28.380749...

Round 28.380749 up and you get 29 upgraders.

## 1e+12 Edit

OH NO! you're done for!

Just kidding.

1e+12 is actually really simple, but when NOT calculating the maximum ore value ( With the Scrodinger method) it's hard to work with.

Here is how to do it:

Let's say your ore value is 5B (5,000,000,000) Now, you would plug in that HUGE number. right?

NOPE!

Instead, you just put 5. yes, 5, but that 5 symbolizes 5,000,000,000.

And when calculating the number, you must remember that your first digit is actually 5B.

Now, you still might get 1e+12.(10^12)

Here is how you find out what 1e+12 is.

Take that 1, add 12 zeros behind it.

BOOM! You got the huge number and exactly what you need.

Now it may not be just 1e+12, it could be stuff like

2.6583923e+15

4.8899e+30

and any possible number.

In that way, simply move the decimal 15 slots back, (or whatever is after the +) and make lots of zeros on the end.

For example,

2.629375e+13

26.29375e+12

262.9375e+11

26937.5e+8

2693750000000.00e+0

And bam. you got it all calculated.

Give yourself a pat on the back.